standard card edge connectors

DIGI-KLIP DRP Series

Dual Readout, .200" Row Spacing for .062 PC Board

 

Specifications

  • DRP100: .100" x .200", 26 contact pairs per carrier maximum
  • DRP150: .150" x .200", 16 contact pairs per carrier maximum
  • DRP156: .156" x .200", 22 contact pairs per carrier maximum

Materials:

Contact Material: .0201" diameter beryllium copper wire, heat treated after forming

Mechanical:

Module Board Thickness: .062" +/- .007"
Carrier Strip Material: Glass filled polyester, disposable, available in any combination from two contact pairs to maximum carrier length. Multiple carriers may be mounted in tandem to achieve any contact configuration.
Insert/Withdrawal Life: Greater than 5000 cycles without increase in contact resistance or reduction in contact pressure.
Contact Normal Force: 4.0 oz., typical per contact with .062" nominal PC board
Mounting Holes: .031" diameter, plated-through

Electrical:

Contact Resistance: Less than .005 ohm per contact
Maximum Current: 3.0 amperes per contact

' ' ' '
' ' ' '